| A brief history of the Mercedes 6 Series Transmissions
The Mercedes 6 series Transmissions which are used in the Sprinter vans are electronically controlled or \\\"shift by wire\\\" 5-speed automatic transmission units which have been used in Mercedes-Benz\\\' own passenger and commercial vehicles since 1996, and are also used in Daimler-Chrysler and other manufacturers\\\' vehicles. Other designations for these transmissions are NAG1 and 5G-Tronic. Each version carries its own model number in the form 722.6xx for example the 1999 C230 has a 722.600, the ML 320 has a 722.662 and so on. The Dodge Sprinter transmission is a 722.681, and the 2007 up Mercedes Sprinter vans carry the 722.683 transmission.
The first cars to run the 722.6 transmission were the V8-powered Mercedes W124 S-class models in 1996 and a wider range of cars and the Sprinter vans were introduced to the new transmission in 1997. These include the C-class, E-class (1997-2003), S-class and M-class models as well as the Mercedes Sprinter vans, Chrysler 300C, Crossfire and Jeep Grand Cherokee, as well as Dodge Sprinter and Freightliner Sprinter vans and some Jaguar and Porsche models.
When first introduced, the Mercedes 6 series transmissions were said by Mercedes to be \\\"sealed for life\\\", meaning that the fluid and filter did not need to be changed for the life of the transmission. However, since 2009 it is recommended that the fluid and filter be changed every 40,000 miles. We at www.sprinterwarehouse.com recommend the fluid and filter be change every 30,000 miles.
It is recommended that genuine Mercedes ATF fluid be used, although there are lower cost alternatives which are also synthetic fluids made to a suitable formulation for the 722.6 transmission. Users should be aware however that using fluids not recommended by the manufacturer may void the warranty.
Article written and submitted by www.sprinterwarehouse.com |
Article Details